iFi ZEN Phono V2 MM/MC Phono Pre-amp For Vinyl Player
- Regular price
- RM 999.00
- Sale price
- RM 999.00
- Regular price
-
RM 1,039.00
Share
Our take
We often recommend investing in a decent entry-level phono stage to complement the growing market of budget record players, or as an upgrade to the phono stage built into the main amplifier. However, in doing so, we might be guilty of making it appear there are more out there than is actually true.
The arrival of the iFi Zen Phono has swollen the ranks of decent entry-level phono stages. You certainly won’t find one with a better spec sheet, or that is better built, but most importantly you’ll also struggle to find anything at this price that’ll make your records sound cleaner.
Product details
LPS + ZEN = MAGICAL COMBO.
You’ve spent years building your dream LP collection. We know because we have done the same!
The ZEN Phono is a wonderful enhancement to your vinyl setup. It will max out every MM/MC cartridge.
Choc full of AMR/iFi trickle-down vinyl technology, it will have you poring over your LPs into the wee, small hours.
SPEC’D TO MAKE YOU SMILE
Unlike any other entry-level phono stage. The ZEN Phono has:
- MM/MC from 36dB >72dB gain. Super-silent noise floor -151dBV
- Precise RIAA with Balanced output, performance comparable to +$1k phono stages
- An intelligent sub-sonic filter. Addresses warp without eliminating bass
HISSLESS WHISPER
Flagship phono amplifiers create their own power supply off the mains, like a mains regenerator. This is fundamental to a well-designed phono stage. Without this, it will struggle to amplify the signal without added noise. This is why phono stages ‘hiss’ so annoyingly.
Unusually, the ZEN Phono has its own high-tech clean power supply. It creates a 1.2MHz power supply (20,000x mains frequency of 60Hz). In this circuit, a 10uF filtering capacitor = 200,000uF at lower, audible frequencies. With serious levels of noise filtration, it performs at the level of classic LC filtering circuits as found in classic tube amplifiers. On its own ‘island’ PCB, it is isolated so there is no noise pollution of the analogue stage.
Just super clean +/- 12V DC.
Measured EIN (Equivalent Input Noise) is -151dBV. It is 20dBV quieter than some Stereophile Class A+ phonos which are -131dBV.
MIL-SPEC RIAA
The EQ circuit uses multiple TDK C0G capacitors in parallel. This is for best stability and the least distortion. They beat polystyrene capacitors and are close to Teflon. Read more here.
Already using the lowest tolerance capacitors combined with multiples in parallel, tolerance is exponentially improved by the square root of the number of capacitors. This is quite a natty circuit design.
The RIAA EQ tolerance level (+/- 0.15dB) is impressive as it is en par with hand-selected capacitors!
WITH GREAT CIRCUIT COMES GREAT COMPONENTS
The ZEN Phono has some seriously good audio components backing up the fab circuit design which has trickled-down from its ultra-fidelity AMR PH-77 and iFi iPhono siblings.
Scroll down for more on the most consequential circuit highlights/boutique components.
SUPER SUB-SONIC
The intelligent sub-sonic filter is from the iPhono range and is quite special. Normal sub-sonic filters remove ‘rumble’ and bass and add phase issues. Our unique AI phono sub-sonic filter removes ‘rumble’ only.
Tech specs
| Gain settings: | MC (v lo)@ MC (lo) MC (hi) MM | 72dB (+/- 1dB) 60dB (+/- 1dB) 48dB (+/- 1dB) 36dB (+/- 1dB) |
| AI Sub-sonic filter: | Remedies only the 'warp' in LPs | No negative impact to bass response |
| Max Output Voltage (RMS): | 20v RMS bal output into 100k (< 1% THD & N) 13.5V RMS bal output into 600R (< 1% THD & N) | |
| Output Impedance: | BAL SE | 200 Ohm resistive 100 Ohm resistive |
| Signal/Noise Ratio: | 94dB(A) MM re 2V BAL/1V UNBAL 80dB(unweighted 80kHz BW) MM re 2V BAL/1V UNBAL 84dB(A) MC Hi re 2V BAL/1V UNBAL 71dB(unweighted 80kHz BW) MM re 2V BAL/1V UNBAL 90dB(A) MC lo re 2V BAL/1V UNBAL 79dB(unweighted 80kHz BW) MC lo re 2V BAL/1V UNBAL 79dB(A) MC vlo re 2V BAL/1V UNBAL 69dB(unweighted 80kHz BW) MC vlo re 2V BAL/1V UNBAL | |
| EIN (equivalent input noise): | 0.6nV|/Hz (unweighted) MC lo/vlo 6.5nV|/Hz (unweighted) MM/MC hi | -151dBV (A weighted) -141dBV (unweighted) -130dBV (A weighted) -119dBV (unweighted) |
| Harmonic Distortion: | < -110dB / 0.0003% MM re 2V BAL/1V UNBAL < -80dB / 0.01% MC lo re 2V BAL/1V UNBAL < -86dB / 0.005% MC vlo re 2V BAL/1V UNBAL | |
| Power Supply: | DC 5V / 500mA | |
| Dimensions: | 158 x117 x35 mm 6.2" x 4.6" x 1.4" | |
| Weight: | 515g (1.14 Ibs) | |
| Warranty: | 12 months |
TechX Guarantee
We understand the anxiety of shopping online in Malaysia particularly on startup and small business website; you don't get to physically hold the product before buying, how will you know if the product will live up to your expectations, ... - which is why we are committed to
- Only sell/advertise products or brands that we believe in
- Thoroughly research a product/model to save you time and get the most value for your money
- Go the extra mile to properly package items for shipping
- Rely on reputable courier service (*not necessarily the cheapest)
- Provide second to none customer service (Lazada/ Shopee gets thousands of visitors a day, we have Only You to focus on)
- Safeguarding your privacy & offer a seamless user experience on our ecommerce webpage
- Ensure all pages and content on TechX are accessed using SSL encryption (*look for the padlock icon on the left side of the address bar...SSL allows sensitive information such as credit card numbers, login credentials to be transmitted securely)
- Your satisfaction! We believe we sourced for the best quality products around, however sometimes life happens. If for any reason you are not 100% satisfied with the quality of any product, we will gladly refund your money + 20% of what your paid
In the event you still need further assurance, write to us via our Contact Form and we'll get back within 2 hours.